Polyurethane Paint

Products

Menu
  • Epoxy Paint
  • Polyurethane Paint
  • Special Polymer
  • Elastomeric Coatings
  • Heat Resistant (HR) Paint
  • Thermosetting Acrylic (TSA)
  • Zinc Rich Coatings
  • Chlorinated Rubber (CR) Paint

The finest specialist for your all coating needs

Scroll to Top

GP Prime 100

  • Clear Polyurethane primer
  • Solid by Volume 40%
  • Application by Brush, Spray
  • Recommended DFT – 40 – 60 micron, over acid cleaned, abrasive cleaned concrete or emery scuffed Wood
  • Ideal primer for Wood, Concrete

GP Prime 101

  • Two-component PU Zinc phosphate primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3, Seven tank Phosphated or Blast cleaned surface
  • Recommended for general industrial applications like Electrical panels, Alternators, Bus bodies, etc

GP Prime 102

  • Two-component PU Zinc Chromate primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3, Seven tank Phosphated or Blast cleaned surface
  • Recommended for general industrial applications like electrical panels and alternators

GP Prime 105

  • Two component Acrylic PU primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 prepared surface
  • Recommended for genral industrial applications, Bus bodies, Auto component

GP Prime 225

  • High build epoxy primer
  • Solid by Volume 70%
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 70-100 micron in a Single coat over St2, St3 or Blast cleaned surface
  • Ideal for components exposed to wear and tear, abrasion like motors

GP PU Mastic

  • Two component Aliphatic Polyurethane based mastic coat
  • Solid by Volume 60%
  • Application by Brush, spray, HVLP or Airless gun
  • Recommended DFT 100 – 120 micron over well prepared surface like St 2, St 3 or blast cleaned

GP Guard PU MIO 133

  • Polyurethane based MIO intermediate coat
  • Solid by Volume 50%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 60 -80 micron over primer

GP Interbond 151

  • Polyurethane based primer surfacer
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 -40 micron over primer

GP Acrylic PU Paint

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 45%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 50 micron over primer

GP Coat 131

  • Aromatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended as Topcoat for Pump, Motor, Valves applications & indoor installations

GP Coat 132

  • Acrylic Aromatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Machine Tools, Power Electrical, Pump Motor Valves, Construction Infrastructure for indoor installation

PU 141 Top Coat CR

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer

PU 141 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer

PU 142 Top Coat

  • Aliphatic Polyurethane based topcoat
  • Solid by Volume 40%
  • Application bu Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 -40 micron over primer
  • Recommended as an Topcoat for general industrial application

PU 143 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 48%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 60 micron over primer

PU 144 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 57%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 75 micron over primer

PU 145 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 57%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 75 micron over primer

PU 147 AG Top Coat

  • Saturated Polyester Aliphatic Polyurethane
  • Solid by Volume 50%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Oil and Gas, Defense, Railways

GP PU Paint

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Project Process, Power Electrical, Machine Tools, auto component both Ferrous and Nonferrous

GP Bond Unicoat

  • Two component Aliphatic Polyurethane based unicoat
  • Solid by Volume 40%
  • Application by spray, HVLP or Airless gun
  • Recommended DFT 40 – 60 micron over well prepared surface like St 2, St 3 or blast cleaned

GP PU Mastic

  • Two component Aliphatic Polyurethane based mastic coat
  • Solid by Volume 60%
  • Application by Brush, spray, HVLP or Airless gun
  • Recommended DFT 100 – 120 micron over well prepared surface like St 2, St 3 or blast cleaned